Introduction

Evolis offers a broad range of high-quality card printers perfect for personalizing ID cards and badges. This guide will assist you in downloading the correct driver and setting up your Evolis printer, including models like the Zenius, Primacy, and KC Series.

Step 1: Download the Driver

To ensure compatibility, download the latest official driver for your Evolis printer model from the manufacturer’s website:

Download the Evolis Printer Driver

This driver supports the following printers:

  • Evolis Zenius
  • Evolis Primacy
  • Evolis Elypso
  • Primacy Lamination
  • Evolis KC200
  • Evolis KC200B
  • Evolis KM500B
  • Evolis KM2000B
  • Evolis Card Lamination Module
  • Evolis KC Essential
  • Evolis KC Prime
  • Evolis KC Max

Step 2: Install the Driver

  1. Download the driver file from the link above.
  2. Open the downloaded file and run the installer.
  3. Follow the on-screen instructions to complete the installation.
  4. Restart your computer to apply changes.

Step 3: Connect the Printer

  1. Plug in the power cable and turn on your Evolis printer.
  2. Connect the printer to your computer using the appropriate cable (USB or network).
  3. Your system should automatically detect the printer.

Step 4: Test Your Printer

  1. Open your printing software.
  2. Select your Evolis printer as the default device.
  3. Print a test card to ensure everything is working correctly.

Troubleshooting Tips

  • Ensure the USB or network cable is securely connected.
  • Restart your computer and printer if the device is not detected.
  • Double-check that the correct driver has been installed for your model.
  • For models with lamination modules, ensure the module is correctly connected.
  • If issues persist, contact our support team for assistance.

Need Help?

For further support, reach out to us at support@zovertang.co.uk.

Download the driver now!

Drivers

Leave a comment

All comments are moderated before being published