Introduction

The Datacard XPS Driver supports a wide range of Datacard printers, from the SD160 to the Sigma Series. This guide will help you download the correct driver and set up your printer for optimal performance.

Step 1: Download the Driver

To ensure compatibility, download the latest official driver for your Datacard printer model from the manufacturer’s website:

Download the Datacard XPS Driver

This driver supports the following printers:

  • SD160
  • SD260
  • SD260L
  • SD360
  • SD460
  • CD800
  • CD800 with CLM Laminator
  • CD820
  • CE840
  • Artista CR805
  • CL900
  • Sigma DS1
  • Sigma DS2
  • Sigma DS3
  • Sigma DS4
  • Sigma DS4-ES1
  • EM1
  • EM2 Systems

Step 2: Install the Driver

  1. Download the driver file from the link above.
  2. Open the downloaded file and run the installer.
  3. Follow the on-screen instructions to complete the installation.
  4. Restart your computer to apply changes.

Step 3: Connect the Printer

  1. Plug in the power cable and turn on your Datacard printer.
  2. Connect the printer to your computer using the appropriate cable (USB, network, etc.).
  3. Your system should automatically detect the printer.

Step 4: Test Your Printer

  1. Open your printing software.
  2. Select your Datacard printer as the default device.
  3. Print a test card to ensure everything is working correctly.

Troubleshooting Tips

  • Ensure the USB or network cable is securely connected.
  • Restart your computer and printer if the device is not detected.
  • Double-check that the correct driver has been installed for your model.
  • For printers with laminator modules (e.g., CD800 with CLM), ensure the module is properly connected.
  • If issues persist, contact our support team for assistance.

Need Help?

For further support, reach out to us at support@zovertang.co.uk.

Download the driver now!

Drivers

Leave a comment

All comments are moderated before being published