Introduction
The Magicard Printer Series includes a wide range of ID card printers, from the compact Pronto 100 to the advanced Ultima Retransfer Printer. This guide will help you download the correct driver and set up your printer for optimal performance.
Step 1: Download the Driver
To ensure compatibility, download the latest official driver for your Magicard printer model from the manufacturer’s website:
➡ Download the Magicard Printer Driver
This driver supports the following printers:
- Pronto 100
- Magicard E+
- Magicard 300
- Magicard 600
- Magicard K
- Pronto
- Prima Laminator
- Prima 8
- 600 NFO
- Magicard E+ NFO
- 300 NFO
-
Legacy Printers:
- Magicard Rio Pro
- Magicard Rio Pro 360
- Magicard Enduro
- Magicard Enduro +
- Magicard Enduro 3E
- Magicard Prima 4
- Magicard Ultima Retransfer
Step 2: Install the Driver
- Download the driver file from the link above.
- Open the downloaded file and run the installer.
- Follow the on-screen instructions to complete the installation.
- Restart your computer to apply changes.
Step 3: Connect the Printer
- Plug in the power cable and turn on your Magicard printer.
- Connect the printer to your computer via the appropriate cable (USB, network, etc.).
- Your system should automatically detect the printer.
Step 4: Test Your Printer
- Open your printing software.
- Select your Magicard printer as the default device.
- Print a test card to ensure everything is working correctly.
Troubleshooting Tips
- Ensure the USB or network cable is securely connected.
- Restart your computer and printer if the device is not detected.
- Check that you’ve installed the correct driver for your printer model and operating system.
- For legacy models, ensure compatibility with your current operating system.
- If issues persist, contact our support team for assistance.
Need Help?
For further support, reach out to us at support@zovertang.co.uk.